The fume-laden airs enter the dust collector, via an inlet, fitted with a flexible extraction arm. The air will pass through horizontally mounted cartridge filters, which are enhanced by an electronically controlled pulsing cleaning process which reduces the reduces the consumption of compressed air and maximizes cartridges life. The filter media will arrests welding fumes whereas clean airs are drawn through a built-in fan and discharge directly through the exhaust louver.
-Front access filter door for easy filter access which reduces filter maintenance and change-out-time.
-The Auto-Pulsing Filter Cleaning System cleans the filters, reduces downtime & maintenance.
-A compact, high-density cartridge filters maximizes collection efficiency and reduces the units profile to optimize shop floor space.
-Attached castors help to move the WFCP series easily.
-Insulated fan compartment give low noise level to reduce worker irritation and enhance the working environment.
-Extraction arm for point source capturing which give better suction.
-The WFCP series come with the high efficiency cartridge filter. The particle removing efficiency is 90% for total retention after 10 min (0.3 - 1.0 micron).
SPECIFICATION
Type | WFCP-30 |
| Motor | 1.5kW |
| Air Flow | 30m3/min |
| Static Pressure | 150 kW |
| Filter | 6 x Cartridge Filter |
| Power | 415V/3pH/50Hz |
| Dust Tray Capacity | 14 Liters |
| Weight | 80 kg |
*Price quoted above: Ex-Factory
(c) 2025 mdex.my All rights reserved
.jpg)
3.jpg)
4.jpg)
5.jpg)
6.jpg)
7.jpg)
8.jpg)
9.jpg)
10.jpg)
11.jpg)
12.jpg)
