| OPERATION The dust-laden air enters the dust collector, via an inlet, fitted with a deflector plate. The air passes through a vertical multi-vee pockets filter bag which is clamped and sealed at the top of the filter body. Heavy dust will fall directly into the dust tray below and the fine dust is arrested by the filter media. Clean air is drawn through a built-in fan and discharged directly or via an optional secondary filter-shaking device. After the fan has stopped, manually shaking the filter with the shaker will effectively dislodge the dust from the filter bag. Description | ALLOYPLAS DCS Shaker Bag Type Dust Collector | | Made | ALLOYPLAS | | Model | DCS-60 | | Country of Origin | Malaysia | | Dimension | 1460mm W x 730mm D x 780mm Ht | | Airflow capacity | 2122 CFM or 60m3/min | | Static Pressure | 150mmH2O or 5bar or 80psi | | No. of filter | Polyester (34 Pocket Filter Bag) | | Inlet Flange | Diameter 250mm | | Power | 415V/3ph/50Hz | | Motor | 4.0kW | | Weight | 220kg | | Accessories | 3” Caster Wheel (SWIVEL 2EA FIX 2EA) | | Dust Tray Capacity | 54 Liters |
BENEFIT AND SPECIAL FEATURES a) Front access filter door for easy filter access which reduces filter maintenance and change-out time. b) No compress air required, low operation cost. c) Dust tray for easy dust disposal. d) Insulated fan compartment gives low noise level to reduce worker irritation and increase productivity. e) Compact, high density multi-vee filters maximize collection efficiency and reduce the units profile to optimized shop floor space. f) Attached castors help to move the DCS Series easily. g) The DCS Series come with the high efficiency filter bag will provide up to 90% filtration efficiency. OPTIONAL PARTS a) Extraction Arm b) Suction Hood c) Damper d) Pre-Dust e) Explosion Vent f) HEPA g) Differential Pressure Gauge *Price quoted above: Ex-Factory |
(c) 2024 mdex.my All rights reserved
1.jpg)
2.jpg)
3.jpg)
4.jpg)
5.jpg)
6.jpg)
7.jpg)
8.jpg)
9.jpg)
10.jpg)
