Model : MA-200
(2A, 200V/220V/240V AC line voltage use)
Functions & Features :- • Designed specifically for AC power supplies up to 2 amps • No degradation of normal (50/60 Hz) line frequency • Power indicator lamp provided
General Specifications :- - Construction : Plug-inConnection: M3.5 screw terminals (chromated steel; torque 0.8 N·m) - Housing materia l: Flame-resistant resin (black) - Monitor lamp : Green neon lamp turns on when the power is supplied.
Installation :- - Operating temperature: -5 to +55°C (23 to 131°F) - Operating humidity: 30 to 90% RH (non-condensing) - Mounting : Surface or DIN rail - Dimensions : W50×H85×D119.5 mm (1.97”×3.35”×4.70”) - Weight : 330g (0.73 lbs)
Performance :- Between Lines Line To Gnd
- Discharge voltage 410V min. 410V min. (peak voltage) - Max. surge voltage* 700V max. 700V max. (peak voltage) - Leakage current ≤1mA ≤1mA @300V DC @300V DC - Rated line voltage 200V AC ---- 220V AC ---- 240V AC ---- - Response time ≤0.1 μsec. - Discharge current 1000A (8/20 μsec) - Max. load current 2A - Voltage drop ≤2V (50/60Hz)
*The maximum voltage that could pass through the surge protector. Protected equipment must be able to withstand this voltage for a very short time period.
Standards & Approvals :- - CE conformity: EMC Directive (2004/108/EC) - EN 61000-6-4 (EMI) - EN 61000-6-2 (EMS) - Low Voltage Directive (2006/95/EC) - EN 61010-1 - Installation category II - Pollution degree 2 - Max. operating voltage 300V
All the above descriptions are subject to change without notice.
Condition : old stock
Note :
Goods sold are non-returnable
Free Shipping Within Peninsular Malaysia Only
Delivery charges will apply to buyers from Sabah, Labuan & Sarawak
International buyers, kindly contact us for shipping charges
Contact us @
Tel : +6012 728 1063
Email : enquiry@giitechnology.com |