I-CASS Security Door Access System is used to control and manage the assessment of door or barrier user at the premises. In addition, access control system can be used to control lift. It can be configured to control floor accessibility up to 16 floors/32 floors/48 floors, in multiple of 16. CTR-16 16 relays controller controls the floor selection button. Expanding the system from controlling 16 floors to 20 floors is only by adding one more CTR 16 to the system.
Each user of the CASTLE I-CASS is issued with an access card.
An access card is encoded with the following information:
User Card Number
The User Card Number is a 10-digit number that uniquely identifies each card holder.
The Personal Identification Number is a 4-digit number. This PIN code feature provides a higher level security by requiring the cardholder to flash the card and to enter the PIN code to open the door. The CASTLE I-CASS can be programmed to operate in CARD ONLY Mode or CARD + PIN Mode.
Support 4 different operation modes
System is capable to operate on 3 different modes, which are controlled by time zone.
4 operation include PIN only mode card only mode, card + PIN mode and dual card mode. System will operate on theses operating modes according to the user time setting.
SPECIFICATIONS:
CONTROLLER| Operating Frequency | : | 24 MHz | | Clock System | : | Real Time | | EPROM / Flash | : | 128Kb | | RAM | : | 1Mb | | Watchdog | : | Y | | Backup Battery Voltage | : | 3.6V | | Type of Storage Use | : | Static RAM | | Operating Temperature | : | 0 – 65°C | | Baud Rate To PCI (BPS) | : | 9600 | | Input Voltage | : | 12Vdc | | Input Voltage Tolerance | : | 12 –13.8Vdc | | Rated Current Input | : | 1A | | Max Connected Devices | : | 32 Doors | | Type Of Reader | : | iCASS Reader | | Cable Type | : | RS485 | | Maximum Length | : | 1000m |
| READER| Processor | : | 16 bits MCU | | RAM | : | 512Kb | | EPROM / Flash | : | 128Kb | | Real Time Clock | : | Yes | | Display Unit | : | 3x32 Blue LCD | | Watchdog | : | Y | | Backup Battery | : | Yes | | Operating Temperature | : | 0 – 65°C | | Input Voltage Tolerance | : | 12–13.8Vdc | | Rated Current Input | : | 1A | | Operating Frequency | : | 24MHz | | Operating Temperature | : | 0-65° C | | Operating Humidity | : | 0-90% | | Buzzer | : | Yes | | Output | : | - | | EMF Protection | : | Yes | | Baud Rate To Controller (BPS) | : | 19200 | Card Format
- Magnetic
- Wiegand 26 | : |
YesYes | | Housing | : | ABS | | Connection Type | : | RS485 |
|
(c) 2024 mdex.my All rights reserved
