Cross-sectional Profile STRIP CEILING-OM5 | DESCRIPTION | Profile and Material Available | · OM5A – Aluminium c/w Polyester Paint Finish · OM5B – Clean COLORBOND® steel / PRIMAMAJU™ steel / ELEMENTS™ steel | Material Thickness · Aluminium c/w Polyester Paint Finish · Clean COLORBOND® steel / PRIMAMAJU™ steel / ELEMENTS™ steel | · 0.50mm / 0.70mm TCT · 0.38mm / 0.48mm TCT | Panel Effective Width & Deep · OM5 A/B 100 · OM5 A/B 150 · OM5 A/B 200 · OM5 A/B 250 · OM5 A/B 300 | · 100mm width x 12mm deep · 150mm width x 12mm deep · 200mm width x 19mm deep · 250mm width x 19mm deep · 300mm width x 19mm deep | Carrier | · MB5 | Length | Made to order with a minimum length of 2 meter. Recommended optimum length of 6 meter, | Method of Installation | Clip-on | Colours Available | Silver / Gold / White Other colours available upon request subject to stock available and time delivery |
Panel Width 100mm/150mm  200mm/250mm/300mm 
Installation Method OM5 panels are fixed onto carrier Metal Bar (MB5). The panels are to be installed from right to left or vice-versa. The MB5 carrier has profiled flanges which are designed to fit the shape of the OM5 panels. Initially, the leg of the OM5 panel is slotted into the carrier MB5 and then light pressure is applied on the panel to ensure that the OM5 panel is clipped on firmly to the carrier. OM5 100mm / 150mm 
OM5 200mm / 250mm / 300mm 
* Max. 600mm c/c for external. Max. 900mm c/c for internal Spacing shall subject to actual site condition. Important Note: Flat metal surfaces will display waviness commonly referred to as oil canning. This caused by steel mill tolerances and is a characteristic, not a defect, of panels manufactured from light gauge metal. Oil canning will not be accepted as a cause for rejection. | 
(c) 2024 mdex.my All rights reserved
